Molecular sieve, or desiccant is kept fresh and dry in these sealed containers . It is then dispensed quickly and efficiently with little wastage. Automatic and manual dispensers available.

Machines for removing the low-e perimeter (softcoat) surface coating from the edge of a glass panel prior to its use in an insulated glass sealed unit. Edge deletion is necessary because the low-e coating on the glass surface affects adhesion with insulated glass sealants. Removal of the edge coating means that the sealant can bond directly to the glass.

Argon Gas Fillers for high performance sealed unit production. These gas fillers are suitable for vertical filling of sealed units through two holes (in-built suction system), or horizontal filling through one hole. To change the gas it is as simple as changing the gas bottle.

A range of Gas Fillers for high performance sealed unit production. These gas fillers are for use with a range of gases and are suitable for vertical filling of sealed units through two holes. To change the gas it is as simple as changing the gas bottle.

Cutting saws, bar benders and staple tables available. Made to order.

A range of assembly tables used in sealed unit manufacture to clamp and seal double glazed units.

A full range of glass washing/drying machines suitable for small/medium sizes of glass. All machines are equipped with 2 upper and 2 lower brushes and placed in a full stainless steel zone.

A wide range of machines with variable washing capability. machines available with 2, 4 and 6 brush action. All machines are suitable for use with any type of finish glass.

Thermoseal's own range of Hot Melt extruders developed over the past 30 years are designed to cater for all levels of sealed unit production. We also supply Hot Melt Guns for plugging gas holes and a digital thermometer for checking the application temperature of the hotmelt.

We have put together some insulated glass sealed unit manufacturing packages suitable for starting up your own sealed unit manufacturing business.

This machine is an integral section of a production line. It is the section of the line where the insulated glass sealed unit is compressed to bond the unit together.

The Polyisobutylene or PIB Machine is used to apply primary PIB to the edge of spacer bar. The spacer bar is then applied to glass to create an initial edge seal, or primary seal to the construction of the double glazed sealed unit.

Various production lines can be made to order. Including press, glass washer and gantry. Left to right and right to left lines available.

A range of one and two component sealing machinery and compatible nozzle guides.

This robust machine can be purchased as a stand alone piece equipment or specified within a production line.It automatically compresses the two panels of glass together with the butyled spacer frame.The rollers automatically adjust to the overall glass width with no operator assistance.

Specialist racks with automatic alignment bar to align spacer bar within the glass sealed unit manufacturing process.

A range of manual and automatic spacer bar bending machinery ,snips saws and cutting tools.

A range of equipment used for testing products and methods of construction throughout the glass sealed unit manufacturing process.

Vertical table to be placed at the end of the production line. Tables available with and without linear drive.

Machines for treatment of water to remove existing contaminants and dissolved solids. Using treated water helps to improve the quality of the production process.

A range of used glass and glazing machinery is held in stock at Thermoseal Group's head office in Birmingham.

A range of used glass and glazing machinery is held on behalf of our customers in stock at Thermoseal Group's head office in Birmingham.