The Edge Deletion Machine is used to remove the low-e surface coating around the edge of a glass panel prior to its use in an insulated glass sealed unit. Pictured is the semi-automatic model. It is also available as a fully manual machine.
Features: Additional Dimension: Bed height 1170mm. Construction & Finish: Frame: Anodised aluminium hollow box section. Infill Panels: Powder coated mild steel. Bed and covering material: 30mm board with felt covering with through holes for floatation. Grind wheels: 200mm Dia x 10mm wide. Guards: constructed from mild steel. Power and Service Requirements:
Voltage: 230 volt single phase.
Electrical connection: 20 Amp socket
Frequency: 50 Hz
Amps: 20 amp
Compressed air: 80 psi Dry clean air
Air consumption: 33-45 L/Min (1.16-1.6 CFM)
Air connection required ½" Min Performance:
Maximum size of glass:
• Length 1980mm
• Width 1000mm
• Thickness Up to 10mm
Features:
• Fan Motor (floatation) 1.1kW 230V.
• Grid wheel motors 0.37 KW 230V (2 off) Vacuum motor (dust removal) 1100 W 230 V.
• Control circuit 24 volt AC/DC.
• Control system Crouzet Logic controller.
• Safety system Emergency stop buttons x 2.
• Crab wire to 2 sides where motors travel with safety relay.
• Glass sensing photoelectric sensor x 2.
• Position Sensing Magnetic reed switches on air cylinders.
Air Requirements: 80 psi Dry clean air/½” Min
Voltage Requirements: 230V Single Phase
Amps Requirements: 20A
Frequency Requirements: 50 Hz Parts & Services:
• UK mainland Warranty: 12 months parts and labour warranty, including delivery and installation.
• Export Warranty: 12 months parts warranty. Delivery and installation by quotation.
Width |
2590mm (8.497 ft) |
Height |
1300mm (4.265 ft) |
Depth |
1660mm (5.446 ft) |
Weight |
1kg |
Box Quantity |
Sold Individually |