Product Range
Thermoseal Group
Enquiry List
0845 331 3950
Back to full range of machinery

1.3M 2-Brush (for 3-12mm glass)

Glass Washing Machine
  • Glass Washing Machine
  • Glass Washing Machine

This open top glass washer has a production speed of up to 3m/min which gives it the facility to produce around 1,000 sealed units/week.  It is supplied with a 1.4m automatic or manual entry rack and 1.4m automatic or manual exit rack with light inspection panel.

It can process pieces of glass bigger than 1.3m on the shortest edge by simply putting them through the washing cycle twice.

Cleaning of the glass is facilitated by two rotating brushes and high pressure water jets.The fine bristles on the brushes create a gentle scrubbing action.The standard brushes fitted are suitable for coated glass,pattern glass and normal float glass.

After the wash cycle, glass is sprayed with a high pressure water rinse and then rubber wiper blades pull off any excess water.  Glass is then dried by a sound insulated high speed fan which forces air through narrow ducts.  These warm columns of air remove any remaining water from the surface of the glass leaving it ready for inspection when it feeds onto the illuminated outfeed rack.

Product CodeSW6001
Height1300mm (51.181 inches)
Width4900mm (192.913 inches)
Weight700kg (1543.236 lbs)
Guide PriceOn Request
Thermoseal Group
Thermoseal Group
Thermoseal Group
  • Specs
  • Parts & Service


Product codes:
SW6001 (left to right) 
SW6002 (right to left)

Optional Extras:
It is possible to add an automatic driven infeed and/or outfeed rack which speeds up production and reduces labour costs.

Additional dimensions

Total Height:  1850mm
Total Length:  4900mm
Infeed Rack:  1300mm x 1400mm
Outfeed Rack:  1300mm x 2000mm

Construction and Finish 

Construction:  Hard wearing steel
Areas in contact with water:  stainless steel.
All other areas:  painted steel.
Top Seal:  Rubber gasket (open top)

Power Requirements

Connection:  9kW

Glass Specification

Maximum Glass Height:  2600mm
Minimum Glass Size:  300 x 100mm
Glass Thickness:  3 - 12mm


No. of brushes:  2
Brush Type:  Low E standard
Brushes driven by:  Chain mechanism
Washing area (Hot): One wash and one rinse
Washer speed:  3m/min
Internal rollers:  Soft type fitted as standard
Dryer:  Fan encased in sound proof box.

Water Requirements 3/4 inch tap (garden type)
Drainage Requirements 1 1/2 inch plastic drain
Voltage Requirements 400V 3-phase + N + E

Parts & Services

All new Glass Washers are sold with a warranty as follows: 

UK mainland Warranty: 

12 months parts and labour warranty, including delivery and installation.

Export Warranty:

12 months parts warranty.  Delivery and installation by quotation.