Product Range
Thermoseal Group
 
Enquiry List
0845 331 3950
Back to full range of machinery

8-Port Manual Desiccant Dispenser

8-Port Manual Desiccant Dispenser
  • 8-Port Manual Desiccant Dispenser

Simple push-operation dispenser can be wall-mounted or mounted on optional freestanding framework as shown in the photograph.

Please note that the stand is an optional extra and is not included in the price quoted. 

There are eight holes angled to enable even the longest tube to be filled.Any width spacer tube can be filled through any port.A corner key is pushed in one end of the spacer tube and then the bar is pushed through the seal into the desiccant hopper gravity then helps the speedy decent of the beads into the spacer tube.

Manual dispenser holds approximately 30Kg of desiccant.

Level of desiccant monitored through glass spy slot.

Desiccant is kept fresh and dry in sealed hopper unit and is dispensed with little wastage.

Product CodeSD002
Height1275mm (50.197 inches)
Width446mm (17.559 inches)
Depth468mm (18.425 inches)
Weight50kg (110.231 lbs)
Crate Size1350mm x 500 x 700mm high
Guide PriceOn Request
Thermoseal Group
Thermoseal Group
Thermoseal Group
  • Specs
  • Parts & Service

Features

Simple push-operation dispenser can be wall-mounted or mounted on optional freestanding framework as shown in the photograph.

Please note that the stand is an optional extra and is not included in the price quoted. 

There are eight holes angled to enable even the longest tube to be filled.Any width spacer tube can be filled through any port.A corner key is pushed in one end of the spacer tube and then the bar is pushed through the seal into the desiccant hopper gravity then helps the speedy decent of the beads into the spacer tube.

Manual dispenser holds approximately 30Kg of desiccant.

Level of desiccant monitored through glass spy slot.

Desiccant is kept fresh and dry in sealed hopper unit and is dispensed with little wastage.

Parts & Services

12 months service and parts is offered with all new machinery.