‘C’ System – Venetian or Pleated Manual Cord Control (Residential or Commercial)

This system is designed with a rotational frontal magnetic control for raising and lowering the blind integrated within a double or triple glazed unit. All ScreenLine systems utilise the force between two coupled rotational magnetic devices. In this particular system, one magnet is located within the header rail which is set inside the glass sealed unit and the other magnet is located within the external cord control which is mounted on the surface of the inside pane of glass. This magnetic system does not compromise the unit seal and so the integrity of the glazing unit.

Residential blinds which have been specifically designed for domestic use are available with 12.5mm Venetian Slats or 14mm Pleats and are for standard 20-22mm cavity double glazing units only.

Commercial blinds which are built to withstand the stresses and strains of a commercial environment are available with either 12.5mm or 16mm Venetian Slats, or 14mm or 20mm Pleats. These blinds are made to measure and can be supplied for 20mm, 22mm, 27mm, 29mm and 32mm cavities. Roller blinds are only available for 27mm cavity units.

Venetian blinds also have a tilt and turn function so there is a choice of substituting the cord control for a knob or wand system.  This is a highly versatile and aesthetic blind system which has excellent technical qualities so lends itself to a wide variety of applications. However, it is particularly suited to structural facades.

This blind comes with its manual external controls supplied within the kit.

‘S’ System – Manual Venetian Side Slide Control (Residential or Commercial)

S System Venetian blinds are designed with an external sliding magnetic control which both raises/lowers and tilts/turns the Venetian blinds encapsulated within the double glazing unit. The control is made from anti-bacterial plastic, making this system ideal for use in hospitals and healthcare.  These blinds are available for both 16mm and 20mm cavity size with 10mm or 12.5mm slats.

The slider rail control mechanism is positioned vertically along the right or left side of the unit and is 54mm outside the standard internal edge (which is 12mm from the edge of the unit). The headrail across the top of the unit is 45mm outside the standard internal edge.

As with all other ScreenLine integrated blinds, this system is an effective solution to light and heat regulation in a home or office and does not compromise the sealed unit.

This blind comes with its manual external controls supplied within the kit.

 

‘S’ System – Manual Pleated Bottom Slide Control (Residential or Commercial)

This system is designed with a frontal magnetic control slider and is only available as a 14mm Pleated blind which fits into a 20mm or 22mm airspace. A magnetic device is positioned centrally on the outer surface of the internal glass which couples with a similar internal magnet located in the moveable head-rail.

The simple slide design can be positioned at any inclination and the head rail can be placed at any side profile position within the sealed unit so that the blind can be moved in a variety of directions: from right to left; from left to right; from the top to the bottom and vice versa. Two blinds can also be installed within one unit so that they draw in towards the centre of the unit and meet in the middle.

As with all other ScreenLine integrated blinds, this system is an effective solution to light and heat regulation in a home or office and does not compromise the sealed unit. The fact that this particular model can be operated at a variety of angles and directions makes it ideal for attics, roof windows and any other window which is not completely vertical.

This blind comes with its manual external controls supplied within the kit.

'W’ System – Venetian or Pleated Battery Operated Motorised Control (Residential or Commercial)

The SL20-22W battery operated motorised blind is available in the residential range for a 20mm or 22mm airspace and can be raised or lowered and Venetian Blinds can be tilted and turned using a touch sensitive battery module which is mounted on the window frame or glass. A remote control is also available to control up to 99 blinds.

The SL20-22W can be supplied as a Venetian or Pleated blind in any of the slat colour or material options.

Commercial blinds which are built to withstand the stresses and strains of a commercial environment are available with either 12.5mm or 16mm Venetian Slats, or 14mm or 20mm Pleats. These blinds are made to measure and can be supplied for 20mm, 22mm, 27mm, 29mm and 32mm cavities.

The clip on removable battery module system is equipped with long life rechargeable batteries which can be charged on a standard micro-USB port or with a unique battery charger we can supply. This system is suitable for both residential and commercial buildings.

The motor can also be powered by a small external solar panel which trickle-charges the batteries without having to remove the battery module. Using solar energy, the battery is automatically recharged so that it is unlikely to run low on battery life.

Please note when ordering this blind system, the external battery module, battery charger and optional remote control and solar panel charger are to be ordered in addition.

‘P’ System – Venetian Tilt Only Side Knob Control (Commercial Only)

The 'P'System is a manual tilt-only blind which is controlled via a wire drive attached to an external knob. Various types of external knob attachment are available.

A specially designed corner key containing a rotational magnet is connected to an external knob through a flexible drive cable. This is fed into the glazing cavity of the window frame so the wires are hidden and the knob control can be located on the bottom of the window frame for ease of use.

This system is available for a 20mm, 24mm airspace (12.5mm slats for a 20mm airspace and 16mm slats for a 24mm airspace) so can be neatly installed in almost all types of existing window frames. The only visible control is the external knob fixed to the window frame so the glass remains completely free and easy to clean.

These particular features make ‘P’ System Blinds ideal for public environments such as hospitals or government offices where a variety of people need to operate this simple but highly protected system.

As with all other ScreenLine integrated blinds, this system is an effective solution to light and heat regulation in a home or office and does not compromise the sealed unit. The magnets have an unlimited life and are resistant to high temperatures ( 120°+).

This blind comes with its manual external controls supplied within the kit.

‘B’ System – Venetian Tilt Only Bottom Knob Control (Commercial Only)

The B system is the patented manual magnetic blind system to be encapsulated within a glass sealed unit with 20mm, 22mm or 27mm airspace. This blind is available with 12.5mm slats and has a tilt-only function.

The external magnetic device is placed on the glass in the lower side of the blind. Motion is transmitted via two gears located in the top and bottom corner keys of the blind, which are connected to each other by means of a shaft which is completely concealed inside the space bar.

The system is particularly suitable for windowsill applications such as structural facades, schools and hospitals because the control device located at the bottom of the blind and so is readily accessible from a low level and within easy reach from a seated position.

The main benefits of this system are:

• External control device can be moved easily
• Quick assembly (with blind completely raised)
• Convenient transport (with blind completely raised)
• The magnets have an unlimited life and are resistant to high temperatures ( 120°+).

This blind comes with its manual external controls supplied within the kit.

‘MB’ System – Venetian or Pleated Wired Motorised Control (Residential or Commercial)

The ScreenLine® SL20MB, SL22MB, SL27MB, SL29MB and SL32MB systems are electrical blind systems used for raising / lowering and tilting blinds integrated within a 20, 22, 27, 29, or 32mm cavity glazing unit.

'MB' System blinds are available in Venetian, Pleated, or Pleated Black-out. Each system has a brushless internal motor integrated within the blind head-rail which incorporates a micro control unit plus encoder which allows simultaneous and synchronized movement of groups of blinds.

All blinds are safe and smooth in operation within the hermetically sealed unit. They have an accurate tilt control which can be operated a low speeds if required.

Glazing of the motorised blind unit requires no additional installation work. The absence of electric cables, fixing screws etc during unit manufacture and the easy clipping assembly system, guarantees total unit integrity. They do however require wiring into electrics so will need an electrician to do so.

Manufactured from high quality materials, coupled with the purity of aesthetic appearance and technical excellence, the system is particularly suited to prestigious projects.